Electrocatalytic CO2 Reduction Research Articles

Highly coordinated Ni-N5 sites for efficient electrocatalytic CO2 reduction toward CO with faradaic efficiency exceeding 99%

Electrochemical production of high value-added CO from CO2 on transition metal-nitrogen-carbon (M−N−C) catalysts is a promising approach to achieve carbon neutral economy, yet the quest for robust catalysts is driven by achieving > 96 % CO faradaic efficiency (FE) under low overpotential and wide potential range. Herein, we report a novel synthetic approach involving post-metallization of the pre-synthesized N-doped carbon (NC-T) support for the fabrication of robust and efficient Ni@NC-T quasi-molecular catalysts toward CO2 electroreduction reaction (CO2RR). The optimum Ni@NC-1100 catalyst exhibited an extremely high FECO > 99 % at −0.72 V vs. reversible hydrogen electrode (RHE). Of interest is the FECO maintained above 96 % over a wide potential window from −0.52 V to −1.12 V. Density functional theory (DFT) calculation validated that the presence of axial pyrrolic-N significantly enhances the Ni-N5 active site for CO2 activation, resulting in the lowest activation energy for the *COOH intermediate generation compared to other axial ligands.

Sustainedly High‐Rate Electroreduction of CO2 to Multi‐Carbon Products on Nickel Oxygenate/Copper Interfacial Catalysts

AbstractCopper (Cu) is the most attractive electrocatalyst for CO2 reduction to multi‐carbon (C2+) products with high economic value in considerable amounts. However, the rational design of a structurally stable Cu‐based catalyst that can achieve high activity and stability towards C2+ products remain a grand challenge. Here, a highly stable nickel oxygenate/Cu electrocatalyst is developed with abundant NiOOH/Cu interfaces by in situ electrochemical reconstruction. The nickel oxygenate/Cu electrocatalyst achieves a superior Faradaic efficiency of 86.3 ± 3.0% and a record partial current density of 2085 A g−1 for C2+ products with long‐term stability. In situ experimental and theoretical studies demonstrates that the exceptional performance in generating C2+ products is attributed to the presence of the NiOOH/Cu interfaces which increase *CO coverage, lower energy barrier for *CO coupling and stabilize *OCCO simultaneously. This work provides new insights into the rational design of electrocatalysts to achieve stable and efficient electrocatalytic CO2 reduction capabilities.

Synthesis of a Triangle-Fused Six-Pointed Star and Its Electrocatalytic CO2 Reduction Activity.

As electrocatalysts, molecular catalysts with large aromatic systems (such as terpyridine, porphyrin, or phthalocyanine) have been widely applied in the CO2 reduction reaction (CO2RR). However, these monomeric catalysts tend to aggregate due to strong π-π interactions, resulting in limited accessibility of the active site. In light of these challenges, we present a novel strategy of active site isolation for enhancing the CO2RR. Six Ru(Tpy)2 were integrated into the skeleton of a metallo-organic supramolecule by stepwise self-assembly in order to form a rhombus-fused six-pointed star R1 with active site isolation. The turnover frequency (TOF) of R1 was as high as 10.73 s-1 at -0.6 V versus reversible hydrogen electrode (vs RHE), which is the best reported value so far at the same potential to our knowledge. Furthermore, by increasing the connector density on R1's skeleton, a more stable triangle-fused six-pointed star T1 was successfully synthesized. T1 exhibits exceptional stability up to 126 h at -0.4 V vs RHE and excellent TOF values of CO. The strategy of active site isolation and connector density increment significantly enhanced the catalytic activity by increasing the exposure of the active site. This work provides a starting point for the design of molecular catalysts and facilitates the development of a new generation of catalysts with a high catalytic performance.

Elaborate Modulating Binding Strength of Intermediates via Three‐component Covalent Organic Frameworks for CO2 Reduction Reaction

AbstractThe catalytic performance for electrocatalytic CO2 reduction reaction (CO2RR) depends on the binding strength of the reactants and intermediates. Covalent organic frameworks (COFs) have been adopted to catalyze CO2RR, and their binding abilities are tuned via constructing donor‐acceptor (DA) systems. However, most DA COFs have single donor and acceptor units, which caused wide‐range but lacking accuracy in modulating the binding strength of intermediates. More elaborate regulation of the interactions with intermediates are necessary and challenge to construct high‐efficiency catalysts. Herein, the three‐component COF with D‐A‐A units was first constructed by introducing electron‐rich diarylamine unit, electron‐deficient benzothiazole and Co‐porphyrin units. Compared with two‐component COFs, the designed COF exhibit elevated electronic conductivity, enhanced reducibility, high efficiency charge transfer, further improving the electrocatalytic CO2RR performance with the faradic efficiency of 97.2 % at −0.8 V and high activity with the partial current density of 27.85 mA cm−2 at −1.0 V which exceed other two‐component COFs. Theoretical calculations demonstrate that catalytic sites in three‐component COF have suitable binding ability of the intermediates, which are benefit for formation of *COOH and desorption of *CO. This work offers valuable insights for the advancement of multi‐component COFs, enabling modulated charge transfer to improve the CO2RR activity.

Electrocatalytic Reduction of CO2 to CO by Molecular Cobalt–Polypyridine Diamine Complexes

Cobalt complexes have previously been reported to exhibit high faradaic efficiency in reducing CO2 to CO. Herein, we synthesized capsule-like cobalt–polypyridine diamine complexes [Co(L1)](BF4)2 (1) and [Co(L2) (CH3CN)](BF4)2 (2) as catalysts for the electrocatalytic reduction of CO2. Under catalytic conditions, complexes 1 and 2 demonstrated the electrocatalytic reduction of CO2 to CO in the presence or absence of CH3OH as a proton source. Experimental and computational studies revealed that complexes 1 and 2 undergo two consecutive reversible one-electron reductions on the cobalt core, followed by the addition of CO2 to form a metallocarboxylate intermediate [CoII(L)–CO22−]0. This crucial reaction intermediate, which governs the catalytic cycle, was successfully detected using high resolution mass spectrometry (HRMS). In situ Fourier-transform infrared spectrometer (FTIR) analysis showed that methanol can enhance the rate of carbon–oxygen bond cleavage of the metallocarboxylate intermediate. DFT studies on [CoII(L)–CO22−]0 have suggested that the doubly reduced species attacks CO2 on the C atom through the dz2 orbital, while the interaction with CO2 is further stabilized by the π interaction between the metal dxz or dxz orbital with p orbitals on the O atoms. Further reductions generate a metal carbonyl intermediate [CoI(L)–CO]+, which ultimately releases CO.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate.

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

CO intermediate‐assisted dynamic Cu sintering during electrocatalytic CO2 reduction on Cu‒N‒C catalysts

The electrochemical CO2 reduction reaction (eCO2RR) to multicarbon products has been widely recognized for Cu‐based catalysts. However, the structural changes in Cu‐based catalysts during the eCO2RR pose challenges to achieving an in‐depth understanding of the structure‐activity relationship, thereby limiting catalyst development. Herein, we employ constant‐potential density functional theory calculations to investigate the sintering process of Cu single atoms of Cu‐N‐C single‐atom catalysts into clusters under eCO2RR conditions. Systematic constant‐potential ab initio molecular dynamics simulations revealed that the leaching of Cu‐(CO)x moieties and subsequent agglomeration into clusters can be facilitated by synergistic adsorption of H and eCO2RR intermediates (e.g., CO). Increasing the Cu2+ concentration or the applied potential can efficiently suppress Cu sintering. Both microkinetic simulations and experimental results further confirm that sintered Cu clusters play a crucial role in generating C2 products. These findings provide significant insights into the dynamic evolution of Cu‐based catalysts and the origin of their activity toward C2 products during the eCO2RR.

CO intermediate-assisted dynamic Cu sintering during electrocatalytic CO2 reduction on Cu‒N‒C catalysts.

The electrochemical CO2 reduction reaction (eCO2RR) to multicarbon products has been widely recognized for Cu-based catalysts. However, the structural changes in Cu-based catalysts during the eCO2RR pose challenges to achieving an in-depth understanding of the structure-activity relationship, thereby limiting catalyst development. Herein, we employ constant-potential density functional theory calculations to investigate the sintering process of Cu single atoms of Cu-N-C single-atom catalysts into clusters under eCO2RR conditions. Systematic constant-potential ab initio molecular dynamics simulations revealed that the leaching of Cu-(CO)x moieties and subsequent agglomeration into clusters can be facilitated by synergistic adsorption of H and eCO2RR intermediates (e.g., CO). Increasing the Cu2+ concentration or the applied potential can efficiently suppress Cu sintering. Both microkinetic simulations and experimental results further confirm that sintered Cu clusters play a crucial role in generating C2 products. These findings provide significant insights into the dynamic evolution of Cu-based catalysts and the origin of their activity toward C2 products during the eCO2RR.

Large language model enhanced corpus of CO2 reduction electrocatalysts and synthesis procedures

CO2 electroreduction has garnered significant attention from both the academic and industrial communities. Extracting crucial information related to catalysts from domain literature can help scientists find new and effective electrocatalysts. Herein, we used various advanced machine learning, natural language processing techniques and large language models (LLMs) approaches to extract relevant information about the CO2 electrocatalytic reduction process from scientific literature. By applying the extraction pipeline, we present an open-source corpus for electrocatalytic CO2 reduction. The database contains two types of corpus: (1) the benchmark corpus, which is a collection of 6,985 records extracted from 1,081 publications by catalysis postgraduates; and (2) the extended corpus, which consists of content extracted from 5,941 documents using traditional NLP techniques and LLMs techniques. The Extended Corpus I and II contain 77,016 and 30,283 records, respectively. Furthermore, several domain literature fine-tuned LLMs were developed. Overall, this work will contribute to the exploration of new and effective electrocatalysts by leveraging information from domain literature using cutting-edge computer techniques.

Nanoporous Bismuth Induced by Surfactant-Modified Dealloying for Efficient Electrocatalytic Reduction of CO2 to Formic Acid

Nanoporous Bismuth Induced by Surfactant-Modified Dealloying for Efficient Electrocatalytic Reduction of CO₂ to Formic Acid

Solid Bi2O3-derived nanostructured metallic bismuth with high formate selectivity for the electrocatalytic reduction of CO2

Solid Bi2O3-derived nanostructured metallic bismuth with high formate selectivity for the electrocatalytic reduction of CO2

Asymmetric coordination engineering of active centers in MXene-based single atom catalysts for high-performance ECO2RR

Asymmetric coordination effect is an important concept in heterogeneous catalysis where both catalytic activity and product selectivity are serious influenced. However, this effect has rarely been understood because of the difficult in characterizing detailed coordination information. Here, by employing a theoretical study on electrocatalytic CO2 reduction reaction (ECO2RR) towards HCOOH over Ti3C2O2-based NS/NN co-coordinated transition metal single atom catalysts (TM-NS/NN-Ti3C2O2 SACs), we show that asymmetric coordination environments have great impact on the electronic structure of the active center. Both electron transferring ability and spin polarization of the active center are vital to optimize the adsorption and hydrogenation of key intermediates. As a result, both catalytic activity and product selectivity can be maximized. V-NN-Ti3C2O2 are predicted to promote high-throughput HCOOH generation process at operation applied potential of −0.32 with considerable electrochemical stability, surpassing most reported catalysts. This work demonstrates V-NN-Ti3C2O2 as high-performance ECO2RR catalysts, and highlights that the introduction of the concept of asymmetric coordination effect may offer a new insight into the rational design of more efficient SACs.

Novel flexible aromatic Cu3 metal-organic π-cluster for electrocatalytic CO2 reduction reaction

Producing Cn products through electrocatalytic CO2 reduction reaction (CO2RR) is of great significance in addressing the global warming crisis. Organic-inorganic hybrid catalysts, characterized by precise and controllable active sites and metal-ligand synergistic interactions, can enhance the reaction activity and stability of Cu-based catalysts. Herein, based on density functional theory (DFT), a novel flexible aromatic Cu3 metal-organic π-cluster (Cu3-π cluster) was constructed, consisting of triple-atom active centers and pentalyne ligands. During the catalytic CO2RR process, the adsorption of H can promote the activation of CO2, this converts the competing hydrogen evolution reaction (HER) into promoting CO2RR. Enhanced aromaticity of its cluster core is credited with stabilizing the coadsorption of H and CO2 (H*+CO2*), consequently lowering the reaction free energy of the CO2 activation process. Research has shown that Cu3-π cluster have high catalytic activity for electrocatalytic CO2 generation of C2H4. Considering the solvation effect, the limit potential of this reaction is -0.60 V. Furthermore, the reaction free energies suggest that the Cu3-π cluster is more inclined to yield C2H4(g) products via COCO* coupling. Moreover, the high CO coverage at the triple-atom active centers not only makes it more challenging for this cluster to adsorb H, but also reduces the energy barrier of the COCO* coupling reaction.In the entire reaction pathway of C2H4(g), there exhibits dynamic self-adaptive behavior in the bond lengths and bond angles of the three Cu atoms in the cluster core, leading to fluctuations in aromaticity. The flexibility and aromaticity changes in this structure enable the Cu3-π cluster to better stabilize intermediates. This work provides theoretical guidance for the application of metal-organic π-clusters, accelerates the screening of catalysts for CO2RR, and provides powerful theoretical guidance for the structure-activity relationships between aromaticity and catalytic activity.

Theoretical Study of Electrocatalytic CO2 Reduction Mechanism on Typical MXenes under Realistic Conditions.

MXenes are a revolutionary class of two-dimensional materials that have been recently demonstrated to exhibit promising capability of electrocatalytic CO2 reduction reaction (CO2RR) in theory and experiment. In electrocatalytic reactions, the active phases, the mechanism, and the performance can be greatly influenced by electrochemical conditions such as applied electrode potential, pH, and electrolyte. Therefore, in this first-principles study, the stable surface structures of three typical MXenes (V2C, Mo2C, and Ti3C2) with variation of electrocatalytic conditions were determined by the Pourbaix phase diagrams. Additionally, the reaction mechanism for CO2RR toward C1 products was investigated based on the thermal dynamically stable phases. The computation revealed that surfaces of all three MXenes are dominated by H* termination throughout the practical CO2RR electrochemical condition ranges. Meanwhile, the bicarbonate ions, which serve as the major electrolyte in CO2RR, show thermal dynamic unfavorability to adsorb on the surfaces. Among the three types of MXenes, V2CH exhibits higher activity in generating CO and HCOOH through the CO2RR, while Mo2CH exhibits higher activity in producing HCHO, CH3OH, and CH4. This comprehensive study provides crucial insights into the mechanism of electrocatalytic CO2RR on MXenes under realistic electrochemical conditions.

Hydrogen‐Bonded Organic Framework Supporting Atomic Bi−N2O2 Sites for High‐Efficiency Electrocatalytic CO2 Reduction

Single atomic catalysts (SACs) offer a superior platform for studying the structure‐activity relationships during electrocatalytic CO2 reduction reaction (CO2RR). Yet challenges still exist to obtain well‐defined and novel site configuration owing to the uncertainty of functional framework‐derived SACs through calcination. Herein, a novel Bi−N2O2 site supported on the (1 1 0) plane of hydrogen‐bonded organic framework (HOF) is reported directly for CO2RR. In flow cell, the target catalyst Bi1‐HOF maintains a faradaic efficiency (FE) HCOOH of over 90% at a wide potential window of 1.4 V.  The corresponding partial current density ranges from 113.3 to 747.0 mA cm−2. And, Bi1‐HOF exhibits a long‐term stability of over 30 h under a successive potential‐step test with a current density of 100~400 mA cm−2. Density function theory (DFT) calculations illustrate that the novel Bi−N2O2 site supported on the (1 1 0) plane of HOF effectively induces the oriented electron transfer from Bi center to CO2 molecule, reaching an enhanced CO2 activation and reduction. Besides, this study offers a versatile method to reach series of M−N2O2 sites with regulable metal centers via the same intercalation mechanism, broadening the platform for studying the structure‐activity relationships during CO2RR.

Hydrogen-Bonded Organic Framework Supporting Atomic Bi-N2O2Sites for High-Efficiency Electrocatalytic CO2Reduction.

Single atomic catalysts (SACs) offer a superior platform for studying the structure-activity relationships during electrocatalytic CO2 reduction reaction (CO2RR). Yet challenges still exist to obtain well-defined and novel site configuration owing to the uncertainty of functional framework-derived SACs through calcination.Herein, a novel Bi-N2O2site supported on the (1 1 0) plane of hydrogen-bonded organic framework (HOF) is reported directly for CO2RR.In flow cell, the target catalyst Bi1-HOF maintains a faradaic efficiency (FE) HCOOH of over 90% at a wide potential window of 1.4 V. The corresponding partial current density ranges from 113.3 to 747.0 mA cm-2. And, Bi1-HOF exhibits a long-term stability of over 30 h under a successive potential-step test with a current density of 100~400 mA cm-2. Density function theory (DFT) calculations illustrate that the novel Bi-N2O2 site supported on the (1 1 0) plane of HOF effectively induces the oriented electron transfer from Bi center to CO2 molecule, reaching an enhanced CO2 activation and reduction. Besides, this study offers a versatile method to reach series of M-N2O2 sites with regulable metal centers via the same intercalation mechanism, broadening the platform for studying thestructure-activity relationships during CO2RR.

Highly efficient electrocatalytic CO2 reduction by a CrIII quaterpyridine complex

Design tactics and mechanistic studies both remain as fundamental challenges during the exploitations of earth-abundant molecular electrocatalysts for CO2 reduction, especially for the rarely studied Cr-based ones. Herein, a quaterpyridyl CrIII catalyst is found to be highly active for CO2 electroreduction to CO with 99.8% Faradaic efficiency in DMF/phenol medium. A nearly one order of magnitude higher turnover frequency (86.6 s-1) over the documented Cr-based catalysts (<10 s-1) can be achieved at an applied overpotential of only 190 mV which is generally 300 mV lower than these precedents. Such a high performance at this low driving force originates from the metal-ligand cooperativity that stabilizes the low-valent intermediates and serves as an efficient electron reservoir. Moreover, a synergy of electrochemistry, spectroelectrochemistry, electron paramagnetic resonance, and quantum chemical calculations allows to characterize the key CrII, CrI, Cr0, and CO-bound Cr0 intermediates as well as to verify the catalytic mechanism.

S-dopant and O-vacancy of mesoporous ZnO nanosheets induce high efficiency and selectivity of electrocatalytic CO2 reduction to CO

Surface engineering can adjust the electronic properties of catalysts, thereby boosting their electrocatalytic performances. Herein, S-doped and O-vacant mesoporous ZnO nanosheets (ZnO-VO-S) were synthesized through the plasma-treatment method, exhibiting highly electrocatalytic selectivity and activity in the conversion of CO2 to CO. Synchrotron X-ray absorption fine structure (XAFS) investigations were used to further clarify the valence state and local coordination structure of Zn, concretely affirming the reduced electron density of Zn in ZnO-VO-S. Specifically, at −1.1 V vs. RHE, the as-prepared ZnO-VO-S demonstrated a high Faradaic efficiency of 90%. Experiments and density functional theory (DFT) suggest that the electron deficiency of Zn caused by the introduction of S dopant and O vacancy, reduces the energy barrier of CO2 to CO by improving the adsorption behavior of the intermediate *COOH.

Operando Studies for CO2/CO Reduction in Flow‐Based Devices

Electrocatalytic CO2 reduction reaction (CO2RR) conducted in a flow‐based device exhibits a substantial enhancement in Faradaic efficiency and catalytic current density compared to a conventional H‐type configuration. This highlights the distinct catalytic environment and behavior inherent in flow cells as opposed to H cells. To investigate the authentic properties of a catalyst within a flow‐based device, customized flow cells have been specifically devised for operando techniques during CO2RR and CORR, rather than resorting to an in‐situ three‐electrode H‐type configuration with its disparate catalytic environment and performance. This approach ensures a catalytic environment identical to that employed in electrochemical measurements. This review delineates the disparities between H‐type and flow‐based cells as well as the operando techniques tailored for flow‐based devices, including X‐ray absorption spectroscopy and Raman spectroscopy, preserving a consistent catalytic environment. It also compiles recent findings on copper‐based systems using operando flow‐based devices. The operando insights reveal a significant augmentation in catalytic current density, impacting both chemical properties and crystal structures. Furthermore, the observation of various catalytic intermediates enriches our comprehension. In essence, the application of operando techniques to flow‐based devices furnishes a comprehensive understanding of the catalytic behavior exhibited by diverse systems, propelling progress toward achieving Net Zero emissions.

Pd-Decorated Cu2O-Ag Catalyst Promoting CO2 Electroreduction to C2H4 by Optimizing CO Intermediate Adsorption and Hydrogenation.

Electrocatalytic CO2 reduction reaction (CO2RR) to high value-added products, such as ethylene (C2H4), offers a promising approach to achieve carbon neutrality. Although recent studies have reported that a tandem catalyst (for example, Cu-Ag systems) exhibits advantage in C2H4 production, its practical application is largely inhibited by the following: (1) a traditional tandem catalyst cannot effectively stabilize the *CO intermediate, resulting in sluggish C-C coupling, and (2) inadequate H2O activation ability hinders the hydrogenation of intermediates. To break through the above bottleneck, herein, palladium (Pd) was introduced into Cu2O-Ag, a typical conventional tandem catalyst, to construct a Cu2O-Pd-Ag ternary catalyst. Extensive experiment and density functional theory calculation prove that Pd can efficiently stabilize the *CO intermediate and promote the H2O activation, which contributes to the C-C coupling and intermediate hydrogenation, the key steps in the conversion of CO2 to C2H4. Beneficial to the efficient synergy of Cu2O, Pd, and Ag, the optimal Cu2O-Pd-Ag ternary catalyst achieves CO2RR toward C2H4 with a faradaic efficiency of 63.2% at -1.2 VRHE, which is higher than that achieved by Cu2O-Ag and most of other reported catalysts. This work is a fruitful exploration of a rare ternary catalyst, providing a new route for constructing an efficient CO2RR electrocatalyst.